LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 398 (Automatic Transmission - 6T50 (M2D) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Range Selector Lever Cable Bracket Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Transmission Range Selector Cable Bracket And Bolts
    GM4364101Courtesy of GENERAL MOTORS COMPANY
  1. Install the transmission range selector cable bracket (2).
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the transmission range selector cable bracket bolts (1) and tighten to 25 N.m (18 lb ft).
    3. Fig 2: Transmission Range Selector Lever Cable
    GM4363825Courtesy of GENERAL MOTORS COMPANY
  3. Connect the range selector cable (2) to the range selector cable bracket.
  4. Connect the range selector cable end (1) to the range selector lever.
  5. Check the range selector cable adjustment. Refer to Range Selector Lever Cable Adjustment 
scientia non olet · About LEMON Manuals