LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 398 (Automatic Transmission - 6T50 (M2D) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Manual Shift Shaft and Seal Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the manual shaft and position switch assembly. Refer to Manual Shift Detent Lever with Shaft Position Switch Assembly Replacement .
    2. Fig 1: Manual Shaft Seal And Special Tool
    GM2079287Courtesy of GENERAL MOTORS COMPANY
  2. Install the manual shaft seal (1) using J-46626  Seal Installer.
  3. Install the battery tray. Refer to Battery Tray Replacement .
scientia non olet · About LEMON Manuals