LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 398 (Automatic Transmission - 6T50 (M2D) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Input Speed Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the control solenoid valve and transmission control module assembly. Refer to Control Solenoid Valve and Transmission Control Module Assembly Replacement .
    2. Fig 1: Speed Sensor And Shift Position Switch Electrical Connectors
    GM1998829Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the input speed sensor electrical connector (1).
    3. Fig 2: Input Speed Sensor, Mounting Bolt And Seals
    GM1998841Courtesy of GENERAL MOTORS COMPANY
  3. Remove the input speed sensor bolt (2) M6 x 23.
  4. Remove the input speed sensor (3).
  5. Remove the 3 input speed sensor seals (1).
scientia non olet · About LEMON Manuals