LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 398 (Automatic Transmission - 6T50 (M2D) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Input Speed Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Input Speed Sensor, Mounting Bolt And Seals
    GM1998841Courtesy of GENERAL MOTORS COMPANY
  1. Install the 3 input speed sensor seals (1).
  2. Install the input speed sensor (3).
    3. CAUTION:

    Refer to Fastener Caution .

  3. Install the input speed sensor bolt (2) M6 x 23 and tighten to 9 N.m (80 lb in).
    4. Fig 2: Speed Sensor And Shift Position Switch Electrical Connectors
    GM1998829Courtesy of GENERAL MOTORS COMPANY
  4. Connect the input speed sensor electrical connector (1).
  5. Install the control solenoid valve and transmission control module assembly. Refer to Control Solenoid Valve and Transmission Control Module Assembly Replacement .
  6. Perform the transmission adaptive values learn procedure. Refer to Transmission Adaptive Values Learn .
scientia non olet · About LEMON Manuals