Removal Procedure
WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
- Remove Front Floor Console Extension Panel - Left (3). Refer to Front Floor Console Extension Panel Replacement - Left Side
- Remove Front Floor Console Extension Panel - Right (3). Refer to Front Floor Console Extension Panel Replacement - Right Side
- Remove Transmission Control Lever Knob (3). Refer to Transmission Control Lever Knob Replacement
- Remove Front Floor Console Cup Holder Liner (1)
- Remove Front Floor Console Trim Plate Bolts (2) (Qty: 2)
- Remove Front Floor Console Trim Plate (1). Refer to Front Floor Console Trim Plate Replacement
- Remove Front Floor Console (1). Refer to Front Floor Console Replacement
- Remove Instrument Panel Extension (1). Refer to Instrument Panel Extension Replacement
- Remove Radio Front Speaker (2). Refer to Radio Front Speaker Replacement
- Remove Radio Front Center Speaker (2). Refer to Radio Front Center Speaker Replacement
- Remove Forward Collision Alert Display (2). Refer to Forward Collision Alert Display Replacement
- Remove Steering Column Assembly (1). Refer to Steering Column Replacement (N37)Steering Column Replacement (N38)
- Remove Radio Control (2). Refer to Radio Control Assembly Replacement
- Remove Instrument Panel Cluster Trim Plate (1). Refer to Instrument Panel Cluster Trim Plate Replacement
- Remove Instrument Cluster (2). Refer to Instrument Cluster Replacement
- Remove Instrument Panel Trim Plate Applique (1). Refer to Instrument Panel Trim Plate Applique Replacement
- Remove Instrument Panel Compartment (1). Refer to Instrument Panel Compartment Replacement
- Remove Instrument Panel Bolts (1) (Qty: 6)
- Remove Instrument Panel Bolts (1) (Qty: 12)
- Remove Instrument Panel Bolts (1) (Qty: 3)
- Remove Instrument Panel Airbag Bolts (1) (Qty: 3)
- Note the location and routing of the instrument panel electrical harness assembly, to ensure proper reinstallation.
- Disconnect the fasteners securing the instrument panel electrical harness assembly to the instrument panel assembly (1) and position out of the way.
- With the aid of an assistant lift the instrument panel assembly (1) rearward and upward from the tie bar assembly.
- Remove the instrument panel assembly (1) from the vehicle.
- Transfer all necessary components.