LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 393 (Instrument Panel Trim And Console Trim) >> Repair Instructions >> Front Floor Console Rear Cup Holder Guide Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Front Floor Console Bolts and Front Floor Console Rear Cup Holder Guide
    GM4421219Courtesy of GENERAL MOTORS COMPANY
  1. Install Front Floor Console Rear Cup Holder Guide (2)
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install and tighten Front Floor Console Bolts (1) (Qty: 4) to 1.5 N.m (13 lb in)
    3. Fig 2: Front Floor Console Bolts and Front Floor Console Rear Cup Holder Guide
    GM4421217Courtesy of GENERAL MOTORS COMPANY
  3. Install Front Floor Console Rear Cup Holder Guide (2)
  4. Install and tighten Front Floor Console Bolts (1) (Qty: 4) to 1.5 N.m (13 lb in)
    5. Fig 3: Front Floor Rear Console Side Trim Panel - Left Side
    GM4418208Courtesy of GENERAL MOTORS COMPANY
  5. Install Front Floor Rear Console Side Trim Panel - Left Side (2). Refer to Front Floor Rear Console Side Trim Panel Replacement - Left Side 
    6. Fig 4: Front Floor Rear Console Side Trim Panel - Right Side
    GM4418604Courtesy of GENERAL MOTORS COMPANY
  6. Install Front Floor Rear Console Side Trim Panel - Right Side (2). Refer to Front Floor Rear Console Side Trim Panel Replacement - Right Side 
scientia non olet · About LEMON Manuals