LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 393 (Instrument Panel Trim And Console Trim) >> Repair Instructions >> Front Floor Console Accessory Switch Mount Plate Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Front Floor Console Extension Panel - Left
    GM4382575Courtesy of GENERAL MOTORS COMPANY
  1. Remove Front Floor Console Extension Panel - Left (3). Refer to Front Floor Console Extension Panel Replacement - Left Side 
    2. Fig 2: Front Floor Console Extension Panel - Right
    GM4382579Courtesy of GENERAL MOTORS COMPANY
  2. Remove Front Floor Console Extension Panel - Right (3). Refer to Front Floor Console Extension Panel Replacement - Right Side 
    3. Fig 3: Transmission Control Lever Knob
    GM4356302Courtesy of GENERAL MOTORS COMPANY
  3. Remove Transmission Control Lever Knob (3). Refer to Transmission Control Lever Knob Replacement
    4. Fig 4: Front Floor Console Cup Holder Liner And Trim Plate Bolts
    GM4393402Courtesy of GENERAL MOTORS COMPANY
  4. Remove Front Floor Console Cup Holder Liner (1)
  5. Remove Front Floor Console Trim Plate Bolts (2) (Qty: 2)
    6. Fig 5: Front Floor Console Bolt Access Hole Cover And Console Retainer Bolts - Left Side
    GM4446760Courtesy of GENERAL MOTORS COMPANY
  6. Use a suitable tool to release the front floor console bolt access hole cover (1) from the front floor rear console side trim panel.
  7. Remove Front Floor Console Retainer Bolts (2) (Qty: 5)
    8. Fig 6: Front Floor Console Bolt Access Hole Cover And Console Retainer Bolts - Right Side
    GM4446766Courtesy of GENERAL MOTORS COMPANY
  8. Use a suitable tool to release the front floor console bolt access hole cover (1) from the front floor rear console side trim panel.
  9. Remove Front Floor Console Retainer Bolts (2) (Qty: 5)
  10. Slide the front floor console back to clear the pins from the instrument panel assembly.
    11. Fig 7: Front Floor Console Trim Plate
    GM4393675Courtesy of GENERAL MOTORS COMPANY
  11. Use a flat bladed plastic trim tool.
  12. Start at the rear of the front floor console trim plate (1) and work your way forward.
    13. Fig 8: Front Floor Console Trim Plate
    GM4393979Courtesy of GENERAL MOTORS COMPANY
  13. Remove Front Floor Console Trim Plate (1)
  14. Disconnect the electrical connectors.
    15. Fig 9: Front Floor Console Accessory Switch Mount Plates and Retaining Bolts
    GM4395951Courtesy of GENERAL MOTORS COMPANY
  15. Remove Front Floor Console Bolts (1) (Qty: 4)
  16. Remove Front Floor Console Accessory Switch Mount Plates (2) (Qty: 2)
  17. Transfer components as necessary.
scientia non olet · About LEMON Manuals