LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 389 (Engine Controls And Fuel - 3.6L (LGX) - Repair Instructions) >> Repair Instructions >> Throttle Body Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove Air Cleaner Outlet Duct. Refer to Air Cleaner Outlet Duct Replacement 
    2. Fig 1: Throttle Body Assembly Electrical Connector And Fasteners
    GM4298127Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect Electrical Connector (1)
    3. NOTE:

    Clean any debris prior to removing the throttle body. Cover any openings to prevent debris from entering into the intake manifold.

  3. Remove Throttle Body Assembly Fasteners (2) (Qty: 4)
    4. Fig 2: Throttle Body And Gasket
    GM4298131Courtesy of GENERAL MOTORS COMPANY
  4. Remove Throttle Body (1)
  5. Remove and DISCARD Throttle Body Gasket (2)
scientia non olet · About LEMON Manuals