Installation Procedure
WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
- Install Fuel Tank Filler Hose (4)
- Install and tighten Fuel Tank Filler Hose Clamp (3) to 4 N.m (35 lb in)
- Connect Evaporative Emission Canister Vent Hose (2). Refer to Plastic Collar Quick Connect Fitting Service
- Install NEW Tie Strap (1)
- Install and tighten Fuel Tank Filler Pipe Bolt (2) to 9 N.m (80 lb in)
- Install NEW Tie Straps (1) (Qty: 2)
- Install and tighten Fuel Tank Filler Pipe Bolt (2) to 2.5 N.m (22 lb in)
- Install NEW Tie Strap (1)
- Install Fuel Tank Filler Pipe Housing. Refer to Fuel Tank Filler Pipe Housing Replacement
- Install Rear Wheelhouse Liner. Refer to Rear Wheelhouse Liner Replacement
CAUTION:
Refer to Fastener Caution .