LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 389 (Engine Controls And Fuel - 3.6L (LGX) - Repair Instructions) >> Repair Instructions >> Fuel Sender Assembly Replacement (AWD) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Fuel Sender And Fuel Pump Seal
    GM4406118Courtesy of GENERAL MOTORS COMPANY
  1. Install a NEW Fuel Pump Seal (2).
  2. Install Fuel Sender (1)
    3. Fig 2: Transfer Hose
    GM4406120Courtesy of GENERAL MOTORS COMPANY
  3. Connect Transfer Hose (1). Refer to Plastic Collar Quick Connect Fitting Service 
    4. Fig 3: Fuel Module Lock Ring
    GM4406112Courtesy of GENERAL MOTORS COMPANY
  4. Use the CH 48482  wrench by turning clockwise and install the lock ring (1).
    5. Fig 4: Electrical Connectors
    GM4406102Courtesy of GENERAL MOTORS COMPANY
  5. Connect Electrical Connectors (1) (Qty: 2)
  6. Install Fuel Tank. Refer to Fuel Tank Replacement (AWD) 
scientia non olet · About LEMON Manuals