Removal Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.

Remove and DISCARD Fuel Feed Intermediate Pipe. Refer to Fuel Feed Intermediate Pipe Replacement

Fig 1: Fuel Feed Pipe And Fuel Pump

Courtesy of GENERAL MOTORS COMPANY

Disconnect Fuel Feed Pipe (1) @ Fuel Pump (2). Refer to Metal Collar Quick Connect Fitting Service

Fig 2: Electrical Connector And Fuel Pump

Courtesy of GENERAL MOTORS COMPANY

Disconnect Electrical Connector (1) @ Fuel Pump (2)

Fig 3: Fuel Pump Components

Courtesy of GENERAL MOTORS COMPANY

CAUTION:

Alternately loosen the fuel pump bolts one turn at a time until the pump is fully disengaged from fuel pump lifter follower. Trying to remove the pump bolts without even side-to-side loosening may result in pump plunger damage

Remove and DISCARD Fuel Pump Bolts (1) (Qty: 2)
Remove Fuel Pump (2)
Remove and DISCARD Gasket (3)
Remove and DISCARD Fuel Pump O-Ring (4)

NOTE:

Take note of the orientation of the valve lifter follower (5).

Remove Valve Lifter Follower (5)