LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 389 (Engine Controls And Fuel - 3.6L (LGX) - Repair Instructions) >> Repair Instructions >> Fuel Feed Pipe Replacement (At Engine) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Fuel Feed Pipe
    GM4316685Courtesy of GENERAL MOTORS COMPANY
  1. Disconnect Fuel Feed Pipe (1). Refer to Fuel Feed Pipe Replacement (At Engine) 
  2. Remove Engine Rear Noise Shield. Refer to Engine Rear Noise Shield Replacement 
    3. Fig 2: Wiring Harness Retainers
    GM4320175Courtesy of GENERAL MOTORS COMPANY
  3. Unclip Wiring Harness Retainers (1) (Qty: 3)
    4. Fig 3: Fuel Feed Front Pipe Bracket Bolt
    GM4320343Courtesy of GENERAL MOTORS COMPANY
  4. Remove Fuel Feed Front Pipe Bracket Bolt (1)
    5. Fig 4: Fuel Feed Pipe
    GM4320359Courtesy of GENERAL MOTORS COMPANY
  5. Remove Fuel Feed Pipe (1). Refer to Metal Collar Quick Connect Fitting Service 
scientia non olet · About LEMON Manuals