LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 389 (Engine Controls And Fuel - 3.6L (LGX) - Repair Instructions) >> Repair Instructions >> Evaporative Emission Front Pipe Replacement (AWD) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Evaporative Emission Front Pipe And Retainers
    GM4311559Courtesy of GENERAL MOTORS COMPANY
  1. Install Evaporative Emission Front Pipe (2) @ Retainers (1) (Qty: 2)
  2. Connect Evaporative Emission Front Pipe (2) @ Evaporative Emission Canister. Refer to Plastic Collar Quick Connect Fitting Service 
  3. Lower the vehicle.
    4. Fig 2: Evaporative Emission Front Pipe And Retainer
    GM4311578Courtesy of GENERAL MOTORS COMPANY
  4. Install Evaporative Emission Front Pipe (2) @ Retainer (1)
    5. Fig 3: Evaporative Emission Front Pipe And Retainer
    GM4358262Courtesy of GENERAL MOTORS COMPANY
  5. Install Evaporative Emission Front Pipe (2) @ Retainer (1)
  6. Evaporative Emission Front Pipe (2) @ Evaporative Emission Canister Purge Solenoid Valve. Refer to Plastic Collar Quick Connect Fitting Service 
scientia non olet · About LEMON Manuals