Evaporative Emission Canister Replacement (AWD)

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Evaporative Emission Canister (AWD)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
WARNING: Refer to Gasoline/Gasoline Vapors Warning . WARNING: Refer to Safety Glasses Warning . Preliminary Procedure Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
1	Evaporative Emission Canister Fastener (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
2	Evaporative Emission Canister Procedure Disconnect the electrical connector. Disconnect the evaporative emission front pipe, evaporative emission canister vent hose, and the evaporative emission canister air inlet hose. Refer to Plastic Collar Quick Connect Fitting Service Transfer parts as necessary.

Callout

Component Name

WARNING:

Refer to Gasoline/Gasoline Vapors Warning .

WARNING:

Refer to Safety Glasses Warning .

Preliminary Procedure Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle

Evaporative Emission Canister Fastener (Qty: 3)

CAUTION:

Refer to Fastener Caution .

Tighten
9 N.m (80 lb in)

Evaporative Emission Canister

Procedure

Disconnect the electrical connector.
Disconnect the evaporative emission front pipe, evaporative emission canister vent hose, and the evaporative emission canister air inlet hose. Refer to Plastic Collar Quick Connect Fitting Service
Transfer parts as necessary.