Camshaft Position Actuator Locating Pin Control Valve Replacement (Bank 2)
WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove Air Cleaner Assembly. Refer to Air Cleaner Assembly Replacement |
|
| 1 | Electrical Connector |
| 2 | Camshaft Position Actuator Locating Pin Control Valve Bolt
CAUTION:
Refer to Fastener Caution . Tighten 10 N.m (89 lb in) |
| 3 | Camshaft Position Actuator Locating Pin Control Valve |
| 4 | Camshaft Position Actuator Solenoid Valve Seal Procedure Inspect the Camshaft Position Actuator Solenoid Valve Seal and replace as necessary. Refer to Engine Front Cover Disassemble , Engine Front Cover Assemble |