LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 383 (Engine Controls And Fuel - 2.5L (LCV) - Repair Instructions) >> Repair Instructions >> Throttle Body Assembly Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Throttle Body And Gasket
    GM4376306Courtesy of GENERAL MOTORS COMPANY
  1. Install Throttle Body Gasket (2)
  2. Install Throttle Body (1)
  3. Fig 2: Throttle Body Bolts
    GM4376283Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  4. Install and tighten Throttle Body Bolts (1) (Qty: 4) to 10 N.m (89 lb in)
  5. Fig 3: Throttle Body Assembly Electrical Connector
    GM4376215Courtesy of GENERAL MOTORS COMPANY
  6. Connect Electrical Connector (1)
  7. Install Air Cleaner Outlet Duct. Refer to Air Cleaner Outlet Duct Replacement 
  8. Perform the throttle learn procedure. Refer to Throttle or Idle Learn