LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 383 (Engine Controls And Fuel - 2.5L (LCV) - Repair Instructions) >> Repair Instructions >> Evaporative Emission Line Replacement - Engine to Chassis (FWD) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Evaporative Emission Pipe And Retainers
    GM4311634Courtesy of GENERAL MOTORS COMPANY
  1. Install Evaporative Emission Pipe (2) @ Retainers (1) (Qty: 2)
  2. Connect Evaporative Emission Pipe (2) @ Evaporative Emission Canister. Refer to Plastic Collar Quick Connect Fitting Service 
    3. Fig 2: Evaporative Emission Pipe And Retainer
    GM4339638Courtesy of GENERAL MOTORS COMPANY
  3. Install Evaporative Emission Pipe (1) @ Retainer (2)
  4. Install Evaporative Emission Canister Purge Hose. Refer to Evaporative Emission Canister Purge Hose Replacement 
scientia non olet · About LEMON Manuals