Camshaft Position Actuator Exhaust Solenoid Valve Replacement

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Camshaft Position Actuator Exhaust Solenoid Valve

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove Intake Manifold Cover. Refer to Intake Manifold Cover Replacement
1	Camshaft Position Actuator Exhaust Solenoid Valve Fastener CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb in)
2	Camshaft Position Actuator Exhaust Solenoid Valve Procedure Disconnect the electrical connector. If NOT replacing the component, install a NEW seal.

Callout

Component Name

Preliminary Procedure
Remove Intake Manifold Cover. Refer to Intake Manifold Cover Replacement

Camshaft Position Actuator Exhaust Solenoid Valve Fastener

CAUTION:

Refer to Fastener Caution .

Tighten
10 N.m (89 lb in)

Camshaft Position Actuator Exhaust Solenoid Valve

Procedure

Disconnect the electrical connector.
If NOT replacing the component, install a NEW seal.