LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 369 (Power Transfer Unit - GKN 761) >> Repair Instructions - On Vehicle >> Fill Plug Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fill the transfer case to the bottom of the fill plug hole with the recommended fluid. Adhesives, Fluids, Lubricants, and Sealers , and Approximate Fluid Capacities .
    2. Fig 1: Oil Drain Plug And Fill Plug
    GM4288856Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Component Fastener Tightening Caution .

  2. Install a NEW fill plug (1) and seal and tighten to 39 N.m (29 lb ft).
  3. Lower the vehicle.
scientia non olet · About LEMON Manuals