Power Transfer Unit Rear Output Shaft Housing Removal
WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
Power Transfer Unit Rear Output Shaft Housing Removal
| Callout | Component Name |
|---|---|
| 1 | Power Transfer Unit Propeller Shaft Retainer
NOTE:
Remove and DISCARD the retainer. |
| 2 | Power Transfer Unit Propeller Shaft Seal - O-Ring |
| 3 | Power Transfer Unit Output Shaft Seal
NOTE:
Remove seal with a thin flat putty knife or equivalent. Inserting the blade of the tool between the outside diameter of the seal and the extension housing surface. |
| 4 | Power Transfer Unit Rear Pinion Housing Bolt (Qty: 8) |
| 5 | Power Transfer Unit Rear Output Shaft Housing |
| 6 | Power Transfer Unit Rear Output Shaft Shim |