LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 366 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Air Inlet Housing Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Air Inlet Housing
    GM4297338Courtesy of GENERAL MOTORS COMPANY
  1. Install Air Inlet Housing (1)
  2. Connect the electrical connector.
    3. Fig 2: Air Inlet Housing Bolts
    GM4297335Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  3. Install and tighten Air Inlet Housing Bolts (1) (Qty: 2) to 2.5 N.m (22 lb in)
    4. Fig 3: Air Inlet Housing Bolts
    GM4297332Courtesy of GENERAL MOTORS COMPANY
  4. Install and tighten Air Inlet Housing Bolts (1) (Qty: 2) to 2.5 N.m (22 lb in)
    5. Fig 4: Heater And Air Conditioning Evaporator And Blower Module
    GM4770555Courtesy of GENERAL MOTORS COMPANY
  5. Install Heater and Air Conditioning Evaporator and Blower Module (1). Refer to Heater and Air Conditioning Evaporator and Blower Module Removal and Installation (C59) Heater and Air Conditioning Evaporator and Blower Module Removal and Installation (Without C59) 
scientia non olet · About LEMON Manuals