Installation Procedure
WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
- Install the air conditioning refrigerant heat exchanger to the vehicle.
- Install Air Conditioning Refrigerant Heat Exchanger (1) @ Front Compartment Side Rail
- Install a NEW sealing washers (3) (Qty: 2)
- Install Air Conditioning Refrigerant Heat Exchanger (1) @ Auxiliary Air Conditioning Evaporator Intermediate Tube
- Install and tighten Air Conditioning Refrigerant Heat Exchanger Nuts (2) (Qty: 2) @ Auxiliary Air Conditioning Evaporator Intermediate Tube to 22 N.m (16 lb ft)
- Install a NEW sealing washers (2) (Qty: 2)
- Install Air Conditioning Refrigerant Heat Exchanger (1) @ Air Conditioning Evaporator Thermal Expansion Valve
- Install and tighten Air Conditioning Refrigerant Heat Exchanger Nut (3) @ Air Conditioning Evaporator Thermal Expansion Valve to 22 N.m (16 lb ft)
- Install Air Conditioning Refrigerant Heat Exchanger (2) @ Front Wheelhouse Panel
- Install and tighten Air Conditioning Refrigerant Heat Exchanger Nut (1) @ Front Wheelhouse Panel to 9 N.m (80 lb in)
- Install Air Conditioning Refrigerant Heat Exchanger (1) @ Front Compartment Side Rail
- Install a NEW sealing washer (3).
- Install Air Conditioning Refrigerant Heat Exchanger (1) @ Air Conditioning Condenser
- Install and tighten Air Conditioning Refrigerant Heat Exchanger Nut (2) @ Air Conditioning Condenser to 22 N.m (16 lb ft)
- Install Air Conditioning Compressor and Condenser Hose (2) @ Air Conditioning Refrigerant Heat Exchanger. Refer to Air Conditioning Compressor and Condenser Hose Replacement (LCV)
- Install Engine Mount Brace (2). Refer to Engine Mount Brace Replacement
- Install Air Cleaner Outlet Duct. Refer to Air Cleaner Outlet Duct Replacement
- Recharge the refrigerant. Refer to Refrigerant Recovery and Recharging (R-1234yf)
CAUTION:
Refer to Fastener Caution .