LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 366 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Air Conditioning Evaporator and Blower Module Drain Hose Replacement (Without C59) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove Front Floor Console. Refer to Front Floor Console Replacement
    2. Fig 1: Air Conditioning Evaporator And Blower Module Drain Hose
    GM4382107Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to HVAC Module Drain Tube Caution .

  2. Prior to removing the air conditioning evaporator and blower module drain tube/hose, use clean and absorbent shop clothes/towels to cover the electrical components protecting the electrical components from water damage.
  3. Push the air conditioning evaporator and blower module drain hose (1) towards the front of vehicle and twist and pull air conditioning evaporator and blower module drain hose (1) to remove from the air conditioning evaporator and blower module drain port.
    4. Fig 2: Air Conditioning Evaporator and Blower Module Drain Hose
    GM4490984Courtesy of GENERAL MOTORS COMPANY
  4. Remove Air Conditioning Evaporator and Blower Module Drain Hose (1)
  5. Remove the air conditioning evaporator and blower module drain hose (1) from the body control module shield hole.
scientia non olet · About LEMON Manuals