LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 366 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Air Conditioning Evaporator and Blower Module Drain Hose Replacement (Without C59) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Air Conditioning Evaporator and Blower Module Drain Hose
    GM4490984Courtesy of GENERAL MOTORS COMPANY
  1. Install the air conditioning evaporator and blower module drain hose (1) into the body control module shield hole.
  2. Install Air Conditioning Evaporator and Blower Module Drain Hose (1)
    3. Fig 2: Air Conditioning Evaporator And Blower Module Drain Hose
    GM4382107Courtesy of GENERAL MOTORS COMPANY
  3. Install the air conditioning evaporator and blower module drain hose (1) onto the air conditioning evaporator and blower module drain port.
  4. Remove the absorbent shop clothes/towels covering the electrical components.
  5. Install Front Floor Console. Refer to Front Floor Console Replacement
scientia non olet · About LEMON Manuals