Removal Procedure
WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Support the exhaust muffler with a suitable jack.
- Remove Exhaust Intermediate Hanger Bolt (1)
- Remove Exhaust Front Pipe Nut (2) @Exhaust Muffler
- Remove Exhaust Gasket (3) and DISCARD
- Disconnect Exhaust Muffler Isolator (1)
- Remove Exhaust Muffler Assembly (1)
NOTE:
With the aid of an assistant, carefully remove the exhaust muffler assembly from the vehicle.