LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 363 (Wheel Drive Shafts) >> Specifications >> Fastener Specifications

Fastener Specifications

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Non-Threaded Fasteners/Components

NOTE:

All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. 

Application
Wheel Drive Shaft O-Ring
Wheel Drive Shaft Retaining Ring
Wheel Drive Shaft Washer
Single Use Threaded Fastener/Component Tightening Specifications

NOTE:

All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. 

Application Specification
Metric (English)
Wheel Drive Shaft Nut
  • First Pass:
150 N.m (111 lb ft)
  • Second Pass:
Loosen 45 degrees
  • Final Pass:
270 N.m (199 lb ft)