LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 360 (Engine Mechanical - 2.5L (LCV)) >> Repair Instructions - On Vehicle >> Engine Front Cover Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove Air Cleaner Assembly. Refer to Air Cleaner Assembly Replacement
  2. Remove Camshaft Cover. Refer to Camshaft Cover Replacement 
  3. Remove Engine Mount. Refer to Engine Mount Replacement 
  4. Remove Crankshaft Balancer. Refer to Crankshaft Balancer Replacement 
  5. Remove Drive Belt Tensioner. Refer to Drive Belt Tensioner Replacement 
    6. Fig 1: Engine Front Cover And Bolts
    GM4038928Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Only bolts 3, 5 and 6 will be replaced with NEW bolts.

  6. Remove and DISCARD Engine Front Cover Bolt (3, 5 and 6)
  7. Remove Engine Front Cover Bolts (2-7, 9)
  8. Remove Engine Front Cover (1)
  9. If replacing the engine front cover, remove and DISCARD the crankshaft front oil seal using an appropriate tool.
scientia non olet · About LEMON Manuals