Crankshaft Front Oil Seal Replacement

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Crankshaft Front Oil Seal

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove Crankshaft Balancer. Refer to Crankshaft Balancer Replacement
1	Crankshaft Front Oil Seal Procedure Use a suitable tool to remove the seal. Use the EN 50820 Front Crankshaft Seal Installer to install the seal. Special Tools EN 50820 Front Crankshaft Seal Installer Equivalent regional tools: Special Tools

Callout

Component Name

Preliminary Procedure
Remove Crankshaft Balancer. Refer to Crankshaft Balancer Replacement

Crankshaft Front Oil Seal

Procedure

Use a suitable tool to remove the seal.
Use the EN 50820 Front Crankshaft Seal Installer to install the seal.

Special Tools
EN 50820 Front Crankshaft Seal Installer
Equivalent regional tools: Special Tools