Camshaft Cover Heat Shield Replacement

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Camshaft Cover Heat Shield

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove Intake Manifold Cover. Refer to Intake Manifold Cover Replacement
1	Camshaft Heat Shield Cover Fastener (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb in)
2	Camshaft Heat Shield Cover Procedure Disconnect the camshaft position actuator solenoid valve. Unclip the wiring harness.

Callout

Component Name

Preliminary Procedure
Remove Intake Manifold Cover. Refer to Intake Manifold Cover Replacement

Camshaft Heat Shield Cover Fastener (Qty: 4)

CAUTION:

Refer to Fastener Caution .

Tighten
10 N.m (89 lb in)

Camshaft Heat Shield Cover

Procedure

Disconnect the camshaft position actuator solenoid valve.
Unclip the wiring harness.