LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 360 (Engine Mechanical - 2.5L (LCV)) >> Repair Instructions - On Vehicle >> Balancer Shaft with Oil Pump Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove Oil Pan. Refer to Oil Pan Replacement (2WD) Oil Pan Replacement (AWD) 
  2. Remove Timing Chain Crankshaft Sprocket. Refer to Timing Chain Crankshaft Sprocket Replacement 
    3. Fig 1: Balancer Shaft with Oil Pump And Bolts
    GM4176256Courtesy of GENERAL MOTORS COMPANY
  3. Remove Balancer Shaft with Oil Pump Bolt (1) (Qty: 8)
  4. Remove Balancer Shaft with Oil Pump (2)
    5. NOTE:

    If replacing the oil pump, remove it from the balancer shaft.

  5. Remove the oil pump. Refer to Balancer Shaft with Oil Pump Disassemble 
scientia non olet · About LEMON Manuals