Balancer Shaft with Oil Pump Installation

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Balancer And Oil Pump Shaft Assembly And Bolts

Courtesy of GENERAL MOTORS COMPANY

Install the balancer and oil pump shaft assembly (2).
Install the balancer and oil pump shaft assembly bolts (1) finger tight.

Fig 2: Balancer And Oil Pump Shaft Assembly Bolt Tightening Sequence

Courtesy of GENERAL MOTORS COMPANY

Tighten the bolts twice in sequence:
1. Tighten the bolts a first pass in sequence to 58 N.m (43 lb ft).
2. Tighten the bolts a final pass in sequence to 58 N.m (43 lb ft).