Automatic Transmission Flex Plate Removal

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools

EN-51760 Flywheel Holding Tool

For equivalent regional tools, refer to Special Tools .

Fig 1: Flywheel Holding Tool And Starter Motor Bolts

Courtesy of GENERAL MOTORS COMPANY

To prevent crankshaft rotation, install EN-51760 holding tool (2) and starter motor bolts (1) at the starter motor location and engaging the flywheel.

Fig 2: Automatic Flex Plate And Bolts

Courtesy of GENERAL MOTORS COMPANY

Remove and discard the flywheel attaching bolts (1).
Remove the flywheel (2).
Remove EN 51760 holding tool.