Removal Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.

Drain the cooling system. Refer to Cooling System Draining and Filling (GE-47716) Cooling System Draining and Filling (Static)
Remove Generator. Refer to Generator Replacement (LGX)

Fig 1: Radiator Outlet Hose, Clamp And Water Pump Inlet Pipe Bolt

Courtesy of GENERAL MOTORS COMPANY

Reposition Radiator Outlet Hose Clamp (1). Refer to Hose Clamp Replacement Guidelines - Spring Type
Disconnect Radiator Outlet Hose (2)
Remove Water Pump Inlet Pipe Bolt (3)

Fig 2: Water Pump Inlet Pipe, Bolts And Seal

Courtesy of GENERAL MOTORS COMPANY

Remove Water Pump Inlet Pipe Bolts (1) (Qty: 2)
Remove Water Pump Inlet Pipe (2)
Remove and DISCARD Water Pump Inlet Pipe Seal (3)