LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 357 (Engine Cooling System) >> Diagnostic Information and Procedures >> Cooling Fan Always On >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify that DTC P0480, P0691, or P0692, is not set.
    • If no DTC is set. 
  3. Verify the scan tool Cooling Fan Motor Command parameter is less than 4%.
    • If less than 4% 
  4. Verify that the G10 Cooling Fan Motor is not operating.
    • If the G10 Cooling Fan Motor is operating 

      Refer to Circuit/System Testing.

    • If the G10 Cooling Fan Motor is not operating 
  5. All OK.