LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 356 (Engine Controls And Fuel - 3.6L (LGX) - DTC P0446 To DTC P3436 And Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> DTC P2635: Fuel Pump Flow Performance >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Do not replace the K111 Fuel Pump Power Control Module based on a history DTC P2635. DTC P2635 may be stored but that does not indicate a failure of the K111 Fuel Pump Power Control Module. Refer to Strategy Based Diagnosis for further history DTC diagnostics.

  1. Verify the proper fuel system pressure. Refer to Fuel System Diagnosis .
    • If the fuel pressure is not normal 

      Repair the fuel system as necessary.

    • If the fuel pressure is normal 
  2. All OK.