LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 356 (Engine Controls And Fuel - 3.6L (LGX) - DTC P0446 To DTC P3436 And Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> DTC P2618 or P2619: Crankshaft Position Signal >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.

P2618 

Crankshaft Position Signal Output Circuit=Short to GroundorOpen-For greater than 5s

P2619 

CCrankshaft Position Signal Output Circuit=Short to Voltage-For greater than 5s

scientia non olet · About LEMON Manuals