Circuit/System Verification

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.

Ignition ON.
Verify no other HO2S or fuel trim DTC is set.
- If any other HO2S or fuel trim DTC is set
  Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- If no other HO2S or fuel trim DTC is set
Verify the conditions listed below do not exist:
- Exhaust system leaks. Refer to Symptoms - Engine Exhaust
- Vacuum hoses split, kinked, or improperly connected
- Insufficient fuel in the tank
- Leaks in the air induction system and the air intake ducts
- Missing air filter element
- A cracked evaporative canister
- Evaporative pipes plugged, obstructed, or leaking
- Leaks in the crankcase ventilation system. Refer to Crankcase Ventilation System Inspection/Diagnosis
- Engine vacuum leaks
- Low fuel system pressure. Refer to Fuel System Diagnosis .
- Contaminated fuel. Refer to Alcohol/Contaminants-in-Fuel Diagnosis .
- Lean fuel injectors. Refer to Fuel Injector Solenoid Coil Test .
- If a condition is found
  Repair as necessary.
- If no condition is found
Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed in the Freeze Frame/Failure Records data.
Verify DTC P2097 or P2099 is not set.
- If a DTC is set
  Refer to Circuit/System Testing.
- If no DTC is set
All OK.