LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 355 (Engine Controls And Fuel - 2.5L (LCV) - DTC P0351 To DTC P2635 And Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> DTC P2227-P2230: Barometric Pressure (BARO) Sensor >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.

P2227 Condition 1 

BARO & Calculated BARO = The actual value is not within a predetermined range of the calculated value.

Condition 2 

BARO = Less than 50 kPa (7.3 PSI) or Greater than 115 kPa (16.7 PSI)

P2228 

BARO = Less than 2 V - For greater than 5 s

P2229 

BARO = Greater than 4.5 V - For greater than 5 s

P2230 

BARO = Signal noisy or erratic - For greater than 5 s