Conditions for Setting the DTC
WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
P0335 Condition 1
Crankshaft Position Sensor=No Signal - For greater than 4 s
Condition 2
Crankshaft Position Sensor=No Signal - For greater than 1 s
Condition 3
Crankshaft Position Sensor=No Signal - During 2 engine revolutions.
P0336 Condition 1
Crankshaft Position Sensor=Signal synchronization lost 10 times within 10 s.
Condition 2
Crankshaft Position Sensor=Sync gap not detected.- For greater than 1 s
Condition 3
Crankshaft Position Sensor=Sync gap not detected. - Since last starter engagement. - For greater than 2 s
Condition 4
Crankshaft Position Sensor=Not between 51 and 65 pulses - During 1 engine revolutions. - For 8 out of 10 engine revolutions