Conditions for Running the DTC
WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
P0335 Condition 1
- DTC P0101, P0102, P0103 = Not set
- MAF Sensor =Greater than 1.5 g/s
Condition 2
- Camshaft Position Sensor=Signal received.
- MAF Sensor=Greater than 1.5 g/s
- Starter=Active
Condition 3
- Engine=Running
- Starter=Inactive
Condition 4
- DTC P0365, P0366, P0641, P0651 = Not set
- Engine=Running
Condition 5
- DTC? P0365, P0366, P0641, P0651 = Not set
- Starter=Active
Frequency the DTC runs=Continuously - After the running conditions are met
P0336 Condition 1
- DTC P0335, P0651 = Not set
- Engine Speed =Greater than 450 RPM
- MAF Sensor =Greater than 3 g/s
Condition 2
- Engine=Running
- Starter=Inactive
Condition 3
- DTC P0101, P0102, P0103
- MAF Sensor =Greater than 3 g/s
Condition 4
- Camshaft Position Sensor=Signal received.
- Starter=Active
Condition 5
- DTC P0365, P0366, P0641, P0651 = Not set
- Engine=Running
Condition 6
- DTC?P0365, P0366, P0641, P0651 = Not set
- Starter=Active
Frequency the DTC runs=Continuously - After the running conditions are met