Conditions for Setting the DTC
WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
P018B
The engine control module does not detect a change in the fuel pressure of at least 30 kPa (4.4 PSI) when the fuel pump is operating. The fuel pressure sensor performance diagnostic detects a fuel pressure sensor output that is stuck within the normal operating range of the sensor.
P018C
The engine control module detects that the fuel pressure sensor voltage is less than 0.14 V for 1 s.
P018D
The engine control module detects that the fuel pressure sensor voltage is greater than 4.86 V for 1 s.