LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 354 (Engine Controls And Fuel - 3.6L (LGX) - DTC P0010 To DTC P0459) >> Diagnostic Information and Procedures >> DTC P0182, P0183, P0187, P0188, P0191, P0192, P111F, P126E, P126F, P127C, P128A-P128D, P128F, P16E4, or P16E5: Fuel Temperature Sensor >> Component Testing

Component Testing

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect a 3 A fused jumper wire between the test points:5 V Reference terminal 3 & 5 V
  2. Connect a jumper wire between the test points:Low Reference terminal 1 & Ground
  3. Test for 2.5 to 4.0 V between the test points:Signal terminal 2 & Low Reference terminal 1
    • If not between 2.5 to 4.0 V 

      Replace the component:B47B Fuel Rail Pressure Sensor

    • If between 2.5 to 4.0 V 
  4. All OK.
scientia non olet · About LEMON Manuals