Conditions for Running the DTC
WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
- DTC P0010, P0013, P0016, P0017, P0335, P0336, P0340, P0341, P0365, or P0366 is not set.
- The ignition voltage is greater than 11 V.
- The engine is operating.
- The desire camshaft position is not changing greater than 3.0 degrees for at least 3 s.
- Both of the desired and actual camshaft position actuator values cannot be greater than 29 degrees or less than 6 degrees.
The DTCs run continuously once the above conditions are met.