LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 348 (Hydraulic Brake System) >> Repair Instructions >> Front Brake Hose Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install Front Brake Hose
    2. Fig 1: Brake Hose Fitting Gasket And Brake Hose Fitting
    GM4261517Courtesy of GENERAL MOTORS COMPANY
  2. Install NEW Brake Hose Fitting Gasket (1) @ Brake Hose Fitting (2)
    3. Fig 2: Brake Hose Fitting Bolt
    GM4261516Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Fastener Caution

  3. Install Brake Hose Fitting Bolt (1) and tighten 44 N.m (32 lb ft)
    4. Fig 3: Brake Hose Bracket Nut
    GM4289791Courtesy of GENERAL MOTORS COMPANY
  4. Install Brake Hose Bracket Nut (1) and tighten 9 N.m (80 lb in)
    5. Fig 4: Brake Pipe Fitting
    GM4289790Courtesy of GENERAL MOTORS COMPANY
  5. Install Brake Pipe Fitting (1) and tighten 18 N.m (13 lb ft)
  6. Bleed the brake system. Hydraulic Brake System Bleeding (Manual) Hydraulic Brake System Bleeding (Pressure) 
  7. Install the tire and wheel assembly. Tire and Wheel Removal and Installation
scientia non olet · About LEMON Manuals