Removal Procedure
WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
- Remove Liftgate Upper Trim Finish Panel (3) Liftgate Upper Trim Finish Panel Replacement
- It is only necessary to lower the headliner. Only do those steps in headliner replacement that will lower the headliner enough to gain access to the part. Headlining Trim Panel Replacement (With C3U)Headlining Trim Panel Replacement (Without C3U)
- Disconnect the electrical connectors.
- Remove the tie straps.(1)
- Disconnect Windshield Washer Liftgate Extension Rear Hose (2) @Rear Window Washer Nozzle Hose - Headliner (3)
- Disconnect Windshield Washer Liftgate Extension Rear Hose Retainer (1) @Liftgate
- Disconnect Windshield Washer Liftgate Extension Rear Hose (2) @Rear Window Washer Nozzle Hose (3)
- Remove the windshield washer liftgate extension rear hose (2) from the vehicle.
Fig 2: Windshield Washer Liftgate Extension Rear Hose And Rear Window Washer Nozzle Hose - Headliner
NOTE:
Reposition wiring harness and connectors as necessary to gain access to the part.
NOTE:
Note the location and routing of the hose to ensure proper installation.