Air Inlet Grille Panel Replacement
WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of GENERAL MOTORS COMPANY
| Callout |
Component Name |
|
Preliminary Procedures
- Windshield Wiper Arm Replacement
- Air Inlet Grille Panel Extension Replacement
- Hood Rear Outer Air Inlet Seal Replacement
|
| 1 |
Air Inlet Grille Panel Retainer (Qty: 10) |
| 2 |
Air Inlet Grille Panel Procedure
- Using an appropriate tool, release the air inlet grille panel from the windshield lower molding.
- Lift up the front edge of the air inlet grille panel, slide the grille panel forward from both hood hinges.
- Disconnect the windshield washer nozzle hose from the windshield washer hose.
- Transfer components as necessary.
|