Component Testing
WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
Rear Windshield Washer Pump
- Install a 15 A fused jumper wire between the B+ terminal 1 and 12 V. Install a jumper wire between the ground terminal 2 and ground.
- Verify the G19 Rear Window Washer Pump activates.
- If the G19 Rear Window Washer Pump does not activate.
Replace the G19 Rear Window Washer Pump.
- If the G19 Rear Window Washer Pump does activate.
- If the G19 Rear Window Washer Pump does not activate.
- All OK