LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 345 (Sunroof System) >> Repair Instructions >> Sunroof Window Replacement - Rear >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
    WARNING:

    Refer to Glass and Sheet Metal Handling Warning .

    WARNING:

    Refer to Cracked Window Warning .

    WARNING:

    Refer to Window Retention Warning .

    NOTE:

    Before cutting out a stationary window, apply a double layer of masking tape around the perimeter of the painted surfaces and the interior trim.

  1. Remove Headlining Trim Panel -Headlining Trim Panel Replacement (With C3U)Headlining Trim Panel Replacement (Without C3U)
  2. Cover the seats and carpeting to protect from broken glass.
    3. NOTE:

    Keep the cutting edge of the tool against the window from inside the vehicle. This will allow the urethane adhesive to be separated from the window.

  3. Use BO 39032  stationary glass removal tool or equivalent in order to remove the window.
    • Leave a base of urethane on the pinchweld flange.
    • The only suitable lubrication is clear water.
    4. Fig 1: Sunroof Window
    GM4420842Courtesy of GENERAL MOTORS COMPANY
  4. Remove Sunroof Window (1)
scientia non olet · About LEMON Manuals