Sunroof Operation
Open to Vent Position
When the position of the sunroof is less than the defined vent position, activating the sunroof Open switch for less than 500 ms results in the sunroof moving until it reaches the vent position.
Normal Open (Non-Express)
When the sunroof switch is held in the Open position, the sunroof begins opening. As long as the switch is continuously held in the Open state the sunroof will not stop in the vent position.
Sunroof Express Open
Press and release the sunroof switch Open position, the Sunroof will Express Open until the controller determines the Sunroof has reached the Comfort Stop position or the Fully Open position.
Normal Close (Non-Express)
When the sunroof switch is in the Close state, the sunroof will begin moving in the closed direction.
Sunroof Express Close
Press and release the sunroof switch Close position, the Sunroof will express close until the controller determines the sunroof has reached the fully closed position.