LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 343 (Secondary And Configurable Customer Control System) >> Description and Operation >> Steering Wheel Controls Description and Operation

Steering Wheel Controls Description and Operation

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Secondary Controls Block Diagram
GM3271087Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
S70E Steering Wheel Controls Switch - Radio Presets
S70F Steering Wheel Controls Switch - Radio Volume
S70R S70R Steering Wheel Controls Switch - Right
P16 P16 Instrument Cluster
A11 A11 Radio

The steering wheel control switches duplicate the function of the primary controls of the associated component, through a network of momentary contact switches.

The Steering Wheel Controls are divided into a right-hand set and left-hand set. The right-hand switch is connected to the IPC LIN serial data and provides input from the left-hand, left-hand rear, and right-hand rear switches

The right-hand switch controller consists of UP/DOWN/LEFT/RIGHT directional, center "select", Push-to-Talk, and Mute buttons. The LEFT/RIGHT buttons navigate the display regions of the cluster. The UP/DOWN buttons navigate the menus. The right-hand rear switch consists of volume up and volume down buttons. The left-hand rear switch consists of favorite up and favorite down buttons.